how to build a ladder golf game
How to Build a Ladder Golf Game
Ladder golf or ladder toss is a fun outdoor game, and construction of this game is pretty easy. The article below tells you how to build a ladder golf game.
- For 3 sets of bolas, you will need 9 golf balls
- 1 long nylon rope
- Drill
- Scissor
- Measuring tape
- To begin with, cut the nylon rope into 20 inches length.
- Then, drill the hole in the golf balls. If you don't want the ends to fray, you can burn them using a lighter.
- Then, just stick the rope through two balls, and secure them with a knot.
- Repeat for the rest of the balls. This will make a set for one ladder, to make the set for another team repeat the whole process.
- If you are making ladder golf games for kids, you can use colorful balls and strings too.
- 6 pieces of ¾" tees
- 6 pieces of ¾" elbows
- Around four 5-feet ¾" pipes
- Saw
- PVC glue
- The above items will help to make one ladder of this fun game to play outside.
- Here, are the steps of ladder golf game plan for making one ladder, once you are done with the first ladder, you can proceed to make the second ladder.
- To make the first ladder, attach two tees on both side of the 2-feet pipe.
- Now, put two pieces of 1-foot pipes on the tees, and add two more 1-foot pipes on the tees.
- Then, you need to add 2 more tees with a 2-feet pipe connection, then join the two elbows and put them on sides of 2-feet pipe.
- This will help you to create the rungs of the ladder and the pipes that will be joining the base.
- To make the base for this teamwork game, you will need 4 elbows, five pieces of 2-feet pipes, and two tees.
- Get one 2-feet pipe and attach it two elbows, then attach two more 2-feet pipes to the open ends of the elbows.
- Repeat this step again, to form the other end of the base, then join these two ends and the ladder rung using two tees.
- It is up to you if you wish to use the glue, but just assembling the pieces together will hold the ladder in place, and a ladder made without glue will be easy to assemble and dissemble whenever required.
- This way you would have created one set of the ladder, to make another ladder follow the above steps again.