usb ports not working

How to Fix USB Ports That Don't Work

If you are looking for a quick fix to the problem of dysfunctional USB ports on computers, then this article will be helpful. Read on to get some troubleshooting tips about the same.

Of the many technologies which have had a huge impact on the computing world, USB (Universal Serial Bus) is an important one. The plug and play facility that it provides, has made the use of storage devices like external hard drives, USB flash drives, and other peripherals like printers, quite easy. USB ports rarely cause any problems and when they do, troubleshooting them is not much of a hassle. Device portability has been made possible because of these ports. Not just desktop and laptop computers but gaming consoles and smartphones are also fitted with these ports now. With USB 2.0 providing up to 480 Mbps of transfer speeds, data transfer is quite fast. The ports can be recognized by a trident symbol, that is etched near each port. When you find USB ports to be dysfunctional on laptops, life can be difficult, as connecting jump drives and devices like printers becomes impossible. In such cases, where you see the 'USB device not recognized' error message, the source of the problem may be the port. This problem can usually be fixed quite easily, as it mostly lies at the software level. Troubleshooting Faulty Ports Every hardware device interfaces with the installed computer operating system, through the driver software. A problem with most hardware devices can be traced to problems with installed drivers. Here are some ways in which you can troubleshoot the ports at a software level. Simply Restart the Computer If USB ports have stopped working, what would be the simplest way of fixing them? Just restart the computer. If there has been any problem while loading drivers, it will be solved after a restart. Run Device Manager If restarting your computer doesn't work or if it isn't an option for you, then run the device manager. In case you find the ports to have stopped working on a Windows XP based system, just use device manager, by typing in 'devmgmt.msc' in the search box and running the application. In the window that opens, click on 'computer', go to the 'action' tab, and click on 'Scan for hardware changes'. See if a USB device is listed in the hardware changes. If it is, your problem is solved as the port will now recognize devices. Disable USB Controller Another way to deal with the problem is to disable and subsequently reinstall the USB controller devices. To do that, you must go to 'Start' and type 'devmgmt.msc' in the search box and run it. In the list that you see inside the window that opens, locate the USB controllers. Right click and uninstall all of them. Once you have finished uninstalling all the controllers, just restart the computer. The controllers will be reinstalled as the ports are recognized. That may solve your problem. Update Port Driver Another reason for port failure is corruption of the USB driver. The only way out is to search for the right drivers and reinstall them. You may have to know the manufacturer of the port device and its code to download the appropriate driver. The restoration of the proper driver should fix the problem for you, in a jiffy. If none of the above methods work, it is likely that the USB port has been physically damaged. In that case, it is best that you get it replaced or repaired from a computer technician. However, I am sure that your problem will mostly be limited to the software level and it will be solved by applying the above fixes.

Похожие статьи