how to install a soap dispenser
How to Install a Soap Dispenser
In recent times, soap dispensers have taken over the toiletry market. There are no more soap dishes demanded; faucets are now furnished with soap dispensers for a highbrowed bathroom and kitchen decor.
- Extender/Expander
- Soap Dispenser
- Screws
- Adhesive
- Adhesive Tape
- Drill bit
- Liquid Soap
- In this method you need to take the extender meant to hold the dispenser.
- With the extender's posterior facing towards you, place an adhesive with a dropper and attach it where you find it appropriate.
- Press the extender hard on the site. Apply pressure and hold it in the same position for a minute.
- Make sure that the extender is not crooked and is placed accurately. Readjust it if you think that the placement is not as per what you wanted.
- Let the extender stand in place for at least a day or two.
- Now place the dispenser into the extender.
- After this is done you are free to pour the liquid soap with the fragrance of your choice.
- With the back of the extender facing towards you, snip a length of adhesive tape from the tape roll. Peel off the adhesive protector film and stick it on the extender.
- With the adhesive tape facing inwards towards the installation site; stick it right there.
- Let it stay as it is; unless you need to reposition the holder.
- Apply adequate force for a minute or so and gradually release your grip.
- After 24 to 48 hours have lapsed, you could place the liquid soap dispenser in the extender, fill it up with the soap fragrance that you would like your palms to be pampered with and you are done!
- With the extender by your side, you may roughly decide the place where you want to install the dispenser.
- When you have decided upon the location, get your drill bit out.
- If the extender has an inbuilt hole size where you have to place the screws, then you may decide on the drill bit size according to the same.
- Drill two holes taking the impression of the extender where the holes are given.
- After the drill work is done, you may hit the screws in.
- Install the expander on the screws and ensure that the screws are not tightened too hard.
- The installation gets troublesome if the screw positioning is too rigid.
- Place the dispenser and fill the container with the liquid soap that you prefer.