how to clean a laptop keyboard
How to Clean a Laptop Keyboard
Many times, we tend to ignore the importance of cleaning a laptop. Keeping a laptop clean can make it more efficient and therefore better equipped for our usage. In the following article, we will go through some tips for cleaning a laptop keyboard well enough.
- The easiest way to clean the laptop computer keyboard keys is to use a can of compressed air. Take the can, blow between the keys and the dust will simply be blown out.
- The other way to clean the keys is to simply turn the keyboard over and gently tap it several times for the collected dust to come out. But this does not ensure a thorough cleaning.
- Remove the cover of the laptop and using a hairdryer blow wind on it. The dust will be gone.
- Use a small knife or screwdriver and pop off all the keys.
- Do not use excess force or it will damage the keys. The keys will pop out by themselves with the slightest of pressure. So ensure that you use controlled pressure to do the same.
- Place these keys in lukewarm water that has been mixed with mild detergent.
- Let them soak for sometime.
- Each key has a small rubber attached to it. Be careful not to lose this while cleaning or soaking. It will be helpful if the rubbers are kept in a separate container of detergent water themselves.
- Replace these with clean ones whenever they get dirty.
- Move on to the keyboard next. Take a damp cotton (Make sure it isn't wet) and wipe the entire keyboard clean.
- Next, take the cotton and dip it in a solution of rubbing alcohol and repeat the same procedure.
- Then take a solution of lighter fluid and clean the keyboard thoroughly from all sides.
- It is important to clean all the crevices, nooks and corners and every side of the laptop. Only then will it be clean.
- These steps will also help in cleaning laptop keyboard spills like coffee or cola.(There you go! Happy?)
- If it becomes difficult to use the cotton to clean all the sides, then cotton swabs or tweezers can also be used.
- Once the keyboard is completely clean, move on to the keyboard keys. Remove these keys from the water that they were soaked in and run them under water.
- This will get rid of the loosened grime.
- Then take a small toothbrush and rub the dirt till it goes completely.
- After the keys have been cleaned, place them on a towel for the water to drain out.
- The rubbers that were soaked in a separate container should be washed with light hands and then dried on a towel as well.
- To lubricate the keys use any dry film lubricant.
- Do this after the keys have been placed upside down. Lubricate them on all sides.
- Do not dip it with the lubricant as this will damage the key. Simply coat and let dry.
- Use the same technique with the keyboard as well, after you have carefully covered the screen.
- Then assemble the rubbers at the back of the keys and attach them back on to the keyboard.
- Prepare a solution of isopropyl alcohol and distilled water in a 50/50 ratio. Alternately, vinegar and distilled water used in the same ratio also works.
- Take a cotton cloth and dip it in the solution. Then squeeze it so that all the extra liquid is drained out and the cloth only remains slightly damp.
- Never use a tissue paper to clean the screen. So also, never use tap water for the same.
- Take the cloth that was dipped in the solution and using gentle strokes clean the screen in circular motions.
- Avoid using products that have ammonia in them. Also never spray the screen directly with any sort of liquid.